mkp metallized polypropylene film capacitors mkp 380s - 386s lmax d max d 5 40 l 1 5 40 construction of capacitors: reference standards: climatic category: metallized polypropylen film capacitors noninductive construction, cylindric shape, self-healing ability, leads: tinned cooper wire surface coating by yellow polyester film tape wraped, epoxy resin sealed flame retardand construction available upon request also ul 94 v-0 general specifications: iec 60384-1, en 130 000 sectional specifications:iec 60386-16, cecc 31 200 55/100/56 (iec 60068-1) nominal capacitancec : tolerance of capacitance: insulation resistance ris: time constant tis: test voltage between terminations: r see table other values on request. nominal capacitance values are based on the e6 serie in accordance to iec 63 publ. or arbitrary values in capacitance range on request. 20% (m), 10% (k), 5%(j), arbitrary tolerances on request c ? 0,33f ris min. 100 000 ma c > 0,33f tis min. 30 000 sec. tis=ri s . c [sec;ma;f] u =1,6 u for 2 sec. at anbient temperature +25c5c rated voltage u working temperature range: r [dc/ac 50-60 hz] - see table. - 55c +100c tr rated voltage u working temperature range: r [dc/ac 50-60 hz] - see table. - 55c +100c l max (mm) d (mm) l (mm) 1 11 0,6 16 19 0,6 25 31 0,8 37,5 14 0,6 20 26 0,8 32,5 36 0,8 41 1 khz 10 khz 100 khz c? 0,1f 0,0006 0,0010 0,0030 r 0,1f? c ?1f 0,0006 0,0020 r c >1f 0,0006 r dissipation factor tg? at +25c max. maximum pulse rise time du/dt [v/sec] lmax (mm) u 160 250 400 630 1000 1600 2000 r ?14 100 120 200 250 300 500 750 ?31 30 45 60 100 140 175 250 19 75 100 150 200 250 300 650 26 45 60 100 120 160 200 450 du/dt [v/ s] max. 100 80 60 40 20 u /u [%] op r -60 -40 -20 0 20 40 60 80 100 [c] operating voltage dependence on ambient temperature type nominal voltage u dc/ac nom. capac.c r r 1000 pf 1500 2200 3300 4700 6800 0,010 f 0,015 0,022 0,033 0,047 0,068 0,10 f 0,15 0,22 0,33 0,47 0,68 1,0 f 1,5 2,2 3,3 4,7 6,8 10 f 5x11 5x11 5x11 5x11 5,5x11 5,5x14 5,5x14 6x14 5,5x19 6,5x19 7x19 8x19 7,5x26 8x26 8,5x26 9x31 10x31 12x31 15x31 17,5x36 20,5x36 5x11 5x14 5x14 5x14 5,5x19 5,5x19 5,5x19 5,5x19 7x26 8x26 9x26 8x31 9,5x31 11x31 13x31 14,5x31 17x31 19x36 21x36 5x11 5x14 6x14 8,5x14 5x19 6x19 7x19 7,5x26 8x26 9x26 9,5x31 11x31 13,5x31 16x31 17,5x36 5x11 5x14 5,5x14 6,5x14 5,5x19 6x19 6,5x19 7x19 7x26 8x26 9,5x26 10x31 11,5x31 14x31 16x31 18x36 21,5x36 7x11 7,5x14 8,5x14 10x14 8x19 9x19 10,5x19 10x26 12,5x26 14,5x26 16x31 19x31 21x36 maximal dimensions d x l (mm) mkp 380s 160 100 mkp 382s 400 220 * mkp 383s 630 250 * mkp 384s 1000 400 * mkp 385s 1600 630 mkp 386s 2000 700 5x19 5x19 5x19 6x19 5x26,5 5,5x26,5 6,5x26,5 7x26,5 8x26,5 9,5x26,5 10,5x26,5 13,5x26,5 12,5x31,5 15,5x31,5 16x31,5 22x31,5 5x26,5 5x26,5 5x26,5 7x26,5 5x31,5 6,5x31,5 7x31,5 7,5x31,5 8x31,5 9x31,5 10,5x31,5 12,5x31,5 15x31,5 18x31,5 22x31,5 * this capacitors are not suitable for across the line applications the manufacturer is not responsible for any damages, caused by the improper instalation and application. k150302-3 electronic components cz syllabova 380/41, 703 00 ostrava - vtkovice phone: +420/ 595 781 623, 596 623 385 6 623 386 fax: +420/ 595 781 612, 59 e - mail: eso es-ostrava.cz web site:http://www.es-ostrava.cz @ mkp 381s 250 160 www.datasheet.co.kr datasheet pdf - http://www..net/
mkp metallized polypropylene film capacitors maximum ac voltage dependence on frequency the capacitors charged which unsinusoidal voltage pulses with quick rise (high du/dt) will be loaded with high current pulses. the current pulse must be limited in order to not overload or not destroy the internal contact and connections. the limit of alowed current loading is given with allowed voltage rise in time du/dt [v/sec] minimum resistance in series with capacitor is rs=u /c du/dt u - rated voltage [v] c - nominal capacitance [f] rs - [ohm] if the max. pulse voltage is less than the rated voltage, higher du/dt values can be permited du /dt = du /dt u /u u - rated votage u - working voltade amplitude pulse loading: rr r r op r r op r op permisible ac voltage: time constant tis: it is the pure sine wave voltagethat may be applied to the capacitor at the frequency up to 50/60 hz. for the operation at higher frequencies refer to permisible ac voltage versus frequency graphs. the time constant is used to express the quality of insulance for higher capacities and is expressed in second with the following formula: tis=ri s . c [sec;ma;f] the max. temperature measured on the case surface at which the capacitor can work continualy. mkp capacitors have the upper operating temperature +100c, at any rate +105c and corresponds to the upper category temperature the maximum direct voltage, or the maximum r.m.s. voltage or the max. value of a voltage pulse, which may be continuously applied to the terminals of a capacitors till to the rated temperature. for the mkp up to +85c u =u . for temperatures between +85c and +100c a decreasing factor of 1,25%/c on the rated voltage u has to be applied. upper operating temperature: category voltage u : c cr r k150302-3 electronic components cz syllabova 380/41, 703 00 ostrava - vtkovice phone: +420/ 595 781 623, 596 623 385 6 623 386 fax: +420/ 595 781 612, 59 e - mail: eso es-ostrava.cz web site:http://www.es-ostrava.cz @ www.datasheet.co.kr datasheet pdf - http://www..net/
|
